PRODUCT CARE
APPLICATIONS
TERMS OF SALE
GALLERY
Mobility Engineering (Cheshire) Ltd
SLAT CONVEYORS
Slat conveyors are predominantly used, and are ideal in such industries as food and pharmaceuticals, where rapid speed and accuracy is of the utmost importance, plus they also have the ability to be washed down for hygiene purposes.
Their construction is either an acetal slat or stainless steel slat, side flexing for bend sections. The most widely used in the food industry is acetal (usually a cheaper option than stainless). The advantage of using slats, is that they can open up slightly around
a bend, therefore a very tight radius can be achieved - usually 2.5 times the width (as a rule of thumb). As mentioned above, the slats are usually manufactured from acetal (a hard, heat resistant plastic) or stainless steel, and range from a width of approximately 80mm to 300mm.
t Because of their width, they will usually be mounted on tripod support stands with floor levelling adjustability, and can come complete with adjustable side guides (if required). Because of the low friction, Slat Conveyors can be ideal for the accumulation of products awaiting to enter machines such as labellers and packaging machines.
Mobility Engineering (Cheshire) Limited, Warrington Lane, Lymm, Cheshire, WA13 0SW
Tel: 01925 755923 Fax: 01925 757721 Email: sales@mobilityengineering.co.uk
Registered in England : Reg No. 1180513 VAT Reg No. 162681557
roller conveyors | gravity roller conveyors | gravity flex conveyors | chain driven roller conveyors
lineshaft roller conveyors | slat conveyors | plastic slat conveyors | steel slat conveyors
chain conveyors | conveyor rollers