Latest News

Kiln Conveyors for Potterywares

Potteryware (of which major types include earthenware, stoneware and porcelain) is made from ceramic materials which require firing. Modern potteryware manufacturers require systems which can produce and fire a large amount of mass produced pottery in the most efficient method with minimal costs for both manufacture and labour.

One of our recent projects at Mobility Engineering was to design and manufacture a system which would be able to load prepared potterywares such as plates, bowls and cups which were ready to be fired onto a conveyor system. The products would then be sent through the kiln and then returned through to the operator for removal from the system.

One of the key aims of the project was to ensure that the kiln could be kept running to capacity on a 24 hour system with minimal staffing required throughout the night-shift. We were able to design and install a system to do this for our client using a three-tier "batt" accumulation system. This is where a slave board is used to hold the pieces of pottery when they are being worked on. The batts accumulate as the pottery is produced and they then enter the kiln and travel through this for approximately six hours, as illustrated in the images below.

Three Tier Conveyor System to Fire Potterywares

If you are looking for a specialist conveyor call us on 01925 755923 or contact us.   

Contact Us

Back to News

Looking for a Conveyor System?

Friendly, professional advice from the Conveyor Experts - but most importantly it's COMPLETELY FREE!

Send us your details below and we'll contact you for a free telephone/email consultation.

Alternatively, Call Us 01925 755923


no thanks